14
EN
5 Listen to FM
radio
Tune to FM radio stations
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
Ensure that you have connected and fully extended the
FM antenna.
1
Press
FM
to select FM tuner mode.
2
Press and hold / for 3 seconds.
»
[SEARCH]
(search) is displayed.
»
The unit tunes to an FM station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold
PROG
for 3
seconds.
»
[AUTO]
(auto) is displayed.
»
The unit automatically stores FM radio
stations with sufficient signal strength.
»
When all the available radio stations are
stored, the first preset radio station is
broadcast automatically.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press
PROG
to activate programming
mode.
»
[PROG]
(program) blinks.
3
Press / repeatedly to select a channel
number.
4
Press
PROG
again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press / or the numeric
buttons to select a preset number.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, an
RDS icon is displayed.
1
Tune to a RDS station.
2
Press
RDS
repeatedly to scroll through the
following information (if available):
»
Program service
»
Program type such as
[NEWS]
(news),
[SPORT]
(sport),
[POP M]
(pop
music)...
»
Radio text message
»
Time
DCM2055_05_UM_V1.0_EN.indd 14
9/22/2011 1:45:25 PM
