10
5 Get
started
Turn on
1
Press
.
The player switches to the last selected
»
source.
Note
If no source is played within 15 minutes, the player
•
switches to standby mode.
If no operation is performed within 15 minutes in
•
standby mode, the player switches to Eco-power standby
mode.
Press
•
to switch the player to standby mode.
Set the clock
The player uses the 24-hour time format.
1
In standby mode, press and hold
DISPLAY/
CLOCK
for 2 seconds.
The hour digits blink.
»
2
Press
/ to set the hour.
3
Press
DISPLAY/CLOCK
again.
The minute digits blink.
»
4
Press
/ to set the minute.
5
Press
DISPLAY/CLOCK
to con rm the setup.
Find the correct video input
channel
1
Turn on the player.
2
Press
DISC
to select the disc source.
Turn on the TV and switch to the correct
•
video-in channel.
Note
See the user manual of your TV for how to switch
•
between video-in channels.
Connect a USB storage device
Note
For the best data transmission, use the supplied USB
•
cable only.
1
Connect the supplied USB cable to:
the
•
jack on the main unit.
the plug of your USB storage device.
•
Connect power
Note
Where the MAINS plug or an appliance coupler is used
•
as the disconnect device, the disconnect device shall
remain readily operable.
Risk of product damage! Make sure that the power
•
supply voltage corresponds to the voltage printed on the
back of the main unit.
Before you connect the AC power cord, make sure that
•
you have complete all other connections.
Protect the power cord from being walked on or
•
pinched, particularly at plugs, convenience receptacles,
and the points where they exit from the apparatus.
Unplug this apparatus during lightning storms or when
•
unused for long periods of time.
EN
