Philips DCB-352, Руководство пользователя

Страница: 12 / 26

12
Set clock
Note
You can set the clock in the standby mode only.
•
1
In standby mode, press and hold PROG/
CLOCK SET to activate the clock setting
mode.
SET CLOCK is displayed.
»
The 12 hour or 24 hour format is
»
displayed.
2
Press / to select 12 hour or 24 hour
format.
3
Press PROG/CLOCK SET .
The hour digits begin to blink.
»
4
Press / to set the hour.
5
Press PROG/CLOCK SET .
The minute digits begin to blink.
»
6
Press / to set the minute.
7
Press PROG/CLOCK SET to confirm.
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press to switch the system to standby
mode.
The backlight on the display panel is
»
reduced.
The clock (if set) is displayed on the
»
display panel.
To switch the system to Eco Power standby
mode:
1
In standby mode, press and hold for
more than 2 seconds.
ECO POWER is displayed.
»
The backlight on the display panel
»
turns off.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
•
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
If you are not going to use the remote control for a
•
long time, remove the batteries.
Do not use old and new or different types of
•
batteries in combination.
Batteries contain chemical substances, so they should
•
be disposed of properly.
a
b
c
EN