Philips DCB-188, Руководство пользователя, Страница: 12 / 28

Note
" If you are not going to use the remote control
for a long time, remove the batteries.
" Do not use old and new or different types of
batteries in combination.
" Batteries contain chemical substances, so they
should be disposed of properly.
Set clock
1
In the standby mode, press and hold
CLOCK/DISPLAY to activate the clock
setting mode.
»
!`
displayed.
2
Press PROG ?
` =
3
Press CLOCK/DISPLAY =
»
The hour digits are displayed and begin
to blink.
4
Press / to set the hour.
5
Press CLOCK/DISPLAY =
»
The minute digits are displayed and
begin to blink.
6
Press / to set the minute.
7
Press CLOCK/DISPLAY =
Turn on
1
Press POWER .
»
The product switches to the last
selected source.
Switch to standby
1
Press POWER to switch the unit to
standby mode.
»
The clock (if set) appears on the
display panel.
4 Get started
Caution
" Use the controls only as stated in this user
manual.
" Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. _________________________
Serial No. __________________________
Prepare the remote control
Caution
" Risk of explosion! Keep batteries away from
<=%Q
=
To insert the remote control battery:
1
Open the battery compartment.
2
& ~ 
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
3
1
2
EN