20
English
Clock/Timer
Clock setting
The clock can be set in either 12-hour or
24-hour mode (
12HR
or
24HR
for example).
1
In standby mode, press and hold
PROG/SET TIME
on the remote control.
2
Press
/-
on the system (or
VOL +/-
on the remote control) to switch
between 12 hour and 24 hour display.
3
Press
PROG/SET TIME
on the remote
control again to confirm.
➜
The clock digits flash on the display panel.
4
Press
/-
on the system (or
VOL +/-
on the remote control) to set the
hours.
5
Press
PROG/SET TIME
on the remote
control again.
➜
The clock digits for the minutes flash.
6
Press
/-
on the system (or
VOL +/-
on the remote control) to set the
minutes.
7
Press
PROG/SET TIME
on the remote
control to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the TUNER (FM)/iPod/USB/CARD
(SD/MMC) is switched on at a set time (one
time operation). The clock time needs to be set
first before the timer can be used.
●
During setting, if no button is pressed within 30
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press
TIMER
for more than
two seconds.
2
Press
SOURCE
on the system
repeatedly (or
the respective source keys on the remote
control) to select the sound source.
3
Press
TIMER
to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press
/-
on the system (or
VOL +/-
on the remote control) to set the
hours.
5
Press
TIMER
again.
➜
The clock digits for the minutes flash.
6
Press
/-
on the system (or
VOL +/-
on the remote control) to set the
minutes.
7
Press
TIMER
to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press
TIMER
once
on the remote control.
➜
Display shows
if activated, and disappears if
deactivated.
Notes:
– Timer is not available in AUX mode.
– If USB/SD/MMC source is selected and no
compatible USB/SD/MMC device is plugged,
TUNER will be selected automatically.
pg001-024_DC910_37_Eng
8/25/08, 10:43
20
