USING THE ALARM
GENERAL
Two different alarm times can be set. This can be useful when you need to be
woken up at a different time e.g. during the week and at the weekend, and you
can set different wake-up modes:
• Tuner mode.
• iPod/USB mode.
• Nature sound mode.
• Buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency
within seconds.
SETTING THE ALARM TIME AND MODE (See
3
)
1
In any mode, press and hold
1 ALM
or
2 ALM
for two seconds.
™
AL1
/
AL2
icon and the hour digits flash.
2
Hold down or press
¡1
/
2™
repeatedly to set and adjust the hours.
3
Press
1 ALM
or
2 ALM
to confirm.
™
AL1
/
AL2
icon and the minutes digits flash.
4
Hold down or press
¡1
/
2™
repeatedly to set and adjust the mintues.
5
Press
1 ALM
or
2 ALM
to confirm.
™
The icon for the current alarm mode flashes.
6
Press
¡1 2™
/ SOURCE
repeatedly to select your desired alarm mode.
• For Nature sound mode, press
ALBUM/PRESET -/+
1
/
2
to select your desired
nature sound track.
™
At the set alarm time, the selected sound source or buzzer will switch on
automatically.
Helpful hints:
–
If you have selected TUNER alarm mode
,
make sure you have properly tuned to a
station before turning off the set.
–
If you have selected iPod/USB alarm mode
,
make sure you have connected the com-
patible iPod player or USB device, or the buzzer mode will be selected automatically.
–
To check the alarm time setting for
AL1
or
AL2,
press
1 ALM
or
2 ALM
.
DC200_79_CCR 2008.2.21 17:01 Page 8
