Mounting Instructions
NOTE: First turn off electricity.
1. Remove mounting plate from fixture.
2. Knockout in back of mounting plate and push wires through
the hole.
3. Securely attach mounting plate to J-box.
Transformer Connect to PCB Ass'y
PCB Ass'y
Mounting Plate
Transformer
6. Connect red lead to battery positive terminal.
Red Wire
Battery
7. Snap fixture onto mounting plate and ensure no wires are
pinched. Make sure unit is fully attached.
8. Restore power and press test button. Battery powered bulb
will come on. AC light will turn off
5. Connect transformer to PCB Ass'y.
Pipe(Not provided)
Pipe Connector
Nut
Screw
Wall Mounting
Ceiling Mounting
1. Open top cover and knockout on the top of fixture.
2. Secure the mounting plate to tube with nut.
knockout
Junction Box
(Not provided)
BL
AC
K
WHITE
ORANGE
120VAC
INPUT
277VAC
INPUT
4.
ELECTRICAL CONNECTIONS:
Connect white wire lead from fixture to white (neutral) wire supply
feed from circuit. Connect black (120V) or orange (277V)
(depending on supply voltage) wire lead from fixture to black(hot)
wire from supply circuit.Use U.L. Listed wire connectors suitable
for the size, type, and number of conductors. No loose strands or
loose wires should be present. Secure wire connectors with U.L
listed electrical tape
3. Reference 4 - 8 step in wall mounting above for ceiling
mounting.
Rev A 11/10 Page 1 of 2
Philips Day-Brite • 776 South Green Street • Tupelo, MS 38804
662-842-7212 • Fax 662-841-5501 • www.daybrite.com
