Philips D460, Расширенная пользовательская документация

Страница: 36 / 54

34
EN
Note
•
You can only delete the read messages. No
deleted messages can be recovered.
Call screening
You can hear the caller while he is
leaving a message.
From the base
• Press / on the answering
machine to adjust the speaker
volume during call screening.
Note
•
If you turn the speaker to the lowest volume
level, the call screening function is off.
Activate/Deactivate the call screening
on the handset
Press / or [Menu] > [Answer
machine]
>
[HS screening]
>
[On]
/
[Off]
,
then press [OK] to confirm.
When the call screening function is
activated, you can:
•
press
[Silent]
to stop listening to
the caller. Press [Screen] to listen
to the caller again.
• press / to adjust the
speaker volume during call
screening.
Set the ring delay
You can set the number of times the
phone rings before the answering
machine picks up the call.
1
Press / or [Menu] > [Answer
machine] > [Ring delay] , then press
[OK] to confirm.
2
Select a new setting, then press
[OK]
to confirm.
» The setting is saved.
Note
•
Make sure that the answering machine is
switched on before this feature can be
applied.
Tip
•
When you access the answering machine
remotely, you are recommended to set
the ring delay to
[Toll saver] mode. This
is a cost effective way to manage your
messages. When there are new messages,
the answering machine picks up the call after
3 rings; When there is no messages, it picks
up the call after 5 rings.
Remote access
You can operate your answering
machine when you are away from
home. Simply make a call to your
phone with a touch tone phone and
enter your 4-digit PIN code.
Note
•
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.