Philips D4550, Расширенная пользовательская документация

Страница: 9 / 38

7 EN
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
• Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
charging, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK] .
Set the country/language
Select your country/language, then press [OK]
to confirm.
»
The country/language setting is saved.
Note
•
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To reset the language, see the following steps.
1
Select [Phone setup] > [Language] , then
press [OK]
to confirm.
2
Select a language, then press [OK] to
confirm.
»
The setting is saved.
Set the date and time
1
Select [Menu] > [Phone setup] > [Date &
time] , then press [OK]
to confirm.
2
Press the numeric buttons to enter the
date, then press
[OK]
to confirm.
»
The time setting menu is displayed on
the handset.
3
Press the numeric buttons to enter the
time.
• If the time is in 12-hour format, press
/ to select [am] or [pm]
(Country
dependent).
4
Press [OK]
to confirm.
Register your handset
Register your handset to the base station
before use.
Auto registration
Extra handsets of the same model can be auto-
registered. Place the unregistered handset on
the base station.
»
The handset detects the base station
and registers automatically.
»
Registration is complete in less
than two minutes. The base station
automatically assigns a handset number
to the handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Select [Menu] > [Services] > [Register] ,
then press [OK]
to confirm.
2
Press and hold on the base station for
5 seconds.
3
Enter the system PIN. Press [Clear] to
make corrections. Then press [OK] to
confirm the PIN.
»
Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.