Philips D150, Расширенная пользовательская документация

Страница: 25 / 34

23
EN
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[SHORT] , [MEDIUM] and [LONG] . The
number of available options varies with different
countries. For details, consult your service
provider.
1
Press MENU/OK .
2
Select
[SERVICES]
>
[RECALL TIME]
,
then press MENU/OK to confirm.
3
Select an option, then press
MENU/OK
to
confirm.
» The setting is saved.
Dial mode
Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press
MENU/OK
.
2
Select
[SERVICES]
>
[DIAL MODE]
, then
press
MENU/OK
to confirm.
3
Select a dial mode, then press
MENU/OK
to confirm.
»
The setting is saved.
Note
•
If your phone is in pulse dial mode, press during a
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.
Auto clock
Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Press
MENU/OK
.
2
Select
[SERVICES]
>
[AUTO CLOCK]
,
then press
MENU/OK
to confirm.
3
Select
[ON]
/
[OFF]
, then press
MENU/OK
.
»
The setting is saved.
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
Press and hold on the base station for
5 seconds.
2
Press MENU/OK on the handset.
3
Select
[SERVICES]
>
[REGISTER]
, then
press
MENU/OK
to confirm.
4
Enter the system PIN. Press
REDIAL/C
to
make corrections. Then press
MENU/OK
to confirm the PIN.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
•
The preset PIN is 0000. No change can be made on it.