Philips Cucina HR1744, Инструкция по эксплуатации

Страница: 4 / 14

in the correct position before you use the Blender.
27. The blender base is intended for use only with this
blender jar. Do not substitute any other blender jar.
28. This Blender has been equipped with an automatic
safety cut-out which cuts off the power supply in case
of an overload. In this case, the pin at the bottom of
the Blender will pop out. If you push the pin back into
the appliance, it will start again.
SAVE THESE
INSTRUCTIONS
SPECIAL INSTRUCTIONS
This Blender has a short cord to reduce the hazards of
becoming entangled in or tripping over a longer cord. An
extension cord may be used if the rating is equal to or
greater than the rating of the Blender. Use an extension
cord rated 13 amperes or greater. Care must be taken to
arrange extension cord so that it will not drape over
countertop or tabletop where it can be pulled on by
children or tripped over unintentionally.
Operating the Blender and another appliance at the same
time from the same electrical circuit could cause an
electrical overload condition, which would blow the fuse or
trip the circuit breaker.
SPECIAL POLARIZED PLUG
INSTRUCTIONS
This Philips Blender has a polarized plug for an
added safety feature (one blade is wider than the other).
To reduce the risk of electrical shock:
• Plug will fit into polarized outlet only one way.
• If plug does not properly fit outlet at first, reverse it.
• If plug still does not fit, contact a qualified electrician.
DO NOT ATTEMPT TO DEFEAT
THIS SAFETY FEATURE