Philips Cucina HD4672, Инструкция по эксплуатации

Страница: 5 / 32

Using the kettle
C
1 Wind excess mains cord around the base of the appliance.
2 Put the base with the kettle on a cool, flat surface, out of the
reach of children and put the plug in the wall socket.
Only use the kettle in combination with its original base.
3 Take the kettle off its base.
C
4 Fill the kettle with water through the spout.
Never fill the kettle while it is standing on its base.
C
◗
You can also open the lid to fill the kettle.
Do not put less than 0.1 litre of water in the kettle.
- If the kettle boils dry, it will switch off automatically but the On/Off
switch will stay in the "I" position. After 10 minutes the kettle must be
lifted off the base to reset its dry-boil protection, you can use the
kettle again.
Do not fill the kettle beyond the 'MAX' indication.
- If too much water has been put in the kettle, boiling water may be
ejected from the spout.
5 Close the lid and put the kettle on its base.
Make sure the lid is properly closed, otherwise the kettle will boil dry.
C
6 Set the On/Off switch to position "I".
The kettle starts heating up.
7 The appliance switches off automatically when the water has
reached the boiling point.
The On/Off switch returns to the "O" position.
8 You can interrupt the boiling process by setting the On/Off
switch to "O".
ENGLISH
5
1
2