Philips CPWBS001, Инструкция по эксплуатации

Страница: 14 / 64

Attach to Your Network Using Radio Signals
Install a wireless network adapter in each computer that will be connected
to the Internet or your local network via radio signals. Philips currently
offers several wireless network cards, including the Philips Wireless USB
Adapter and the Philips Wireless Notebook Adapter.
Rotate both antennas on the back of the Wireless Base Station to the
desired position. For more effective coverage, position antennas along
different axes; for example around 45 to 90 degrees apart.Try to place the
Wireless Base Station in a position that is located in the center of your
wireless network. Normally, the higher you place the antenna, the better the
performance. Ensure that the Wireless Base Station’s location provides
optimal reception throughout your home or office.
Computers equipped with a wireless adapter can communicate with each
other as an independent wireless Local Network by configuring each
computer to the same radio channel. However, the Wireless Base Station
can provide access to your wired/wireless Local Network or to the Internet
for all wireless workstations. Each wireless PC in this network infrastructure
can talk to any computer in the wireless group via a radio link, or access
other computers or network resources in the wired Local Network
infrastructure or over the Internet via the Wireless Base Station.
The wireless infrastructure configuration not only extends the accessibility
of wireless PCs to the wired Local Network, but also increases the effective
wireless transmission range for wireless PCs by retransmitting incoming
radio signals through the Wireless Base Station.
ENGLISH
14