Philips CMD310, Руководство по обслуживанию

Страница: 2 / 29

2
4. Remove the five screws which was used for fixing the KB baord of the panel
CMD310 -- Dismantlement Method
1. Remove the two screws in the top cover and then remove the top cover ; remove the five screws in heat sink and then remove the heat sink
2. Remove the six screws in the rear chassis and then remove the rear chassis ; Remove the four screws in left right of the base panel
3. Remove the FFC which was connected the panel and main board, then remove the panel; Remove the screw in the main board and wire which was connect to small board, then
remove main board
Remove the screws in the top cover
Remove top cover
Remove heat sink Remove the screws in the heat sink
Remove the six screws
Remove the rear chassis
Remove the screws on the left right side of the base panel
Remove FFC
Remove the screw and wire
Remove main board
Remove panel
Main board
Panel
Remove the five screws
PANEL PCB