1) Rated average life is the life obtained, on the average, from large representative groups of lamps in laboratory tests under controlled conditions at 10 or more operating hours per start. It is based on survival of at least 67%
of the lamps and allows for individual lamps or groups of lamps to vary considerably from the average.
2) Measured at 100 hrs. life. Approximate lumen values listed are for vertical and horizontal operation of the lamp.
3) Approximate lumen output at 40% of lamp rated average life.
Philips Lighting Company
200 Franklin Square Drive
P.O. Box 6800
Somerset, NJ 08875-6800
1-800-555-0050
A Division of Philips Electronics North America Corporation
Printed in USA 2/07
P-2257-D
Philips Lighting
281 Hillmount Road
Markham, Ontario
Canada L6C 2S3
1-800-555-0050
A Division of Philips Electronics Ltd.
www.philips.com
Ceramalux
®
Instant Restrike High Pressure Sodium Lamps
Electrical,Technical and Ordering Data
(Subject to change without notice)
Std.
Rated
Approx.
Approx.
.
Product
Ordering
ANSI
Operating
Bulb
Pkg.
LCL
MOL
Avg. Life
Initial
Mean
CCT
Number
Code
Code
Watts
Bulb
Base
Position
Finish
Qty.
(In.)
(In.)
(Hrs)
1
Lumens
2
Lumens
3
CRI
(K)
35467-0
C50S68/2
S68
50
ED23
1
⁄
2
Mogul
Universal
Clear
12
5
7
3
⁄
4
24,000+
3800
3450
21
2100
26541-3
C70S62/2
S62
70
ED23
1
⁄
2
Mogul
Universal
Clear
12
5
7
3
⁄
4
24,000+
5600
5050
21
2100
26560-3
C100S54/2
S54
100
ED23
1
⁄
2
Mogul
Universal
Clear
12
5
7
3
⁄
4
24,000+
9100
8190
21
2100
26561-1
C150S55/2
S55
150
ED23
1
⁄
2
Mogul
Universal
Clear
12
5
7
3
⁄
4
24,000+
15,600
14,000
21
2100
37717-6
C250S50/2
S50
250
ED18
Mogul
Universal
Clear
12
5
3
⁄
4
9
3
⁄
4
24,000+
27,500
24,750
21
2100
37688-9
C400S51/2
S51
400
ED18
Mogul
Universal
Clear
12
5
3
⁄
4
9
3
⁄
4
24,000+
49,000
44,000
21
2100
20412-3
C1000S52/2
S52
1000
E-25
Mogul
Universal
Clear
6
8
3
⁄
4
15
1
⁄
16
24,000+
140,000
126,000
21
2100
Warnings, Cautions and Operating Instructions
WARNING:
These lamps must be operated in fixtures
designed for use with High Pressure Sodium lamps.
The fixture wattage rating must match the wattage indicated
on the outer glass bulb. Do not scratch the outer bulb or
subject it to pressure as this could cause the outer bulb to
crack or shatter. A partial vacuum in the outer bulb may
cause glass to fly if the glass is struck. Operating the lamp
improperly may result in
PERSONAL INJURY,
PROPERTY DAMAGE, BURNS AND FIRE.
1. If the outer glass bulb is broken, shut off power immediately
and remove the lamp after it has cooled.
2. Use only auxiliary equipment meeting Philips and/or ANSI
standards. Use within voltage limits recommended by ballast
manufacturer.
A. Operate lamp only within specified limits of operation.
B. For total supply load refer to ballast manufacturers
electrical data.
3. Protect lamp base, socket and wiring against moisture,
corrosive atmospheres and excessive heat.
4. Replace the lamp if the outer glass bulb has been scratched,
cracked or damaged in any way.
5. If a lamp bulb support is used, be sure to insulate the sup-
port electrically so as to avoid possible decomposition of
the bulb glass.
6. Do not use this lamp in a fixture which redirects a
substantial portion of the energy toward the arc tube
and its immediate vicinity, as this may lead to very
early lamp failure.
7. Take care in handling and disposing of lamps. If arc tube
is broken, avoid skin contact with any of the contents
or fragments.
8. The arc tube of this lamp contains sodium and
mercury. Dispose of in accordance with federal,
state and local requirements.
WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS for Ceramalux
®
High Pressure Sodium Lamps
