8
EN
ISO male
connectors
Connect to
e Red
Ignition key +12V DC
when ON/ACC
f
Blue
Motor/electric antenna
relay control lead
g White edged blue
strip
Amplifier relay control
lead
h Black
Ground
i
Yellow
To the +12V car
battery which is
energized at all times
2
Connect the antenna and amplifier as
illustrated, if applicable.
Connector
Connect to
1 ANTENNA
Antenna
2 Socket for ISO male
connectors
As indicated in
Step 1 above
3 REAR LINE OUT R
(Socket)
Rear right speaker
4 REAR LINE OUT L
(Socket)
Rear left speaker
5 OE REMOTE
(Purple)
OE Remote
Tip
•
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the unit.
Mount into the dashboard
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
•
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
•
If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
3
Remove the mounting sleeve with the
supplied disassembly tools.
183 mm
53mm
5mm