6
EN
• In radio mode, press and hold to
activate the automatic search of radio
stations.
q
• For .wma and .mp3 tracks, press to
select the next folder.
• In radio mode, press to select a tuner
band.
r
• Press repeatedly to select a preset
sound equalizer.
• Press and hold to activate the setup of
bass, treble, balance, and fader.
s
• Press to enable or disable the
MAX
Sound
feature.
t
/
• Tune to a radio station.
• Press to skip to the previous or next
track.
• Press and hold to rewind a track or
search fast forward.
u
• Press to reset the system to factory
default settings.
v
Disc slot
3 Install the car
audio system
Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Note
•
This system is designed for negative ground (earth) 12V
DC operation only.
•
Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system heats
up during use.
•
To avoid short-circuit: before you connect, make sure that
the ignition is off.
•
Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
•
Make sure that all loose leads are insulated with electrical
tape.
•
Make sure that the leads do not get caught under screws
or iron parts that will move (e.g. seat rail).
•
Make sure that all ground (earth) leads are run to a
common ground (earth) point.
•
Use only the supplied mounting hardware for a safe and
secure installation.
•
Improper fuses can cause damage or fire. When you need
to change the fuse, consult a professional.
•
When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
•
Never connect speaker wires to the metal body or chassis
of the car.
•
Never connect speaker wires with stripes to one another.
