Philips CEM220/51, Руководство по обслуживанию

Страница: 10 / 34

3-1 3-1
Software version check & upgrade Upgrade software
VS-104
1
、
Check Servo software version
2
、
Check MCU software version
3
、
Check BT software version
VM-103
VBT-177
In USB/SD/Disc mode, press DISP + 6 simutaliously
for 2 sec, LCD display is as below
:
In tuner mode, press DISP + 6 simutaliously for 2 sec,
LCD display is as below
:
In tuner mode, press DISP + 5 simutaliously for 2 sec,
LCD display is as below
:
102 is the servo software version
101 is the MCU software version
177 is the MCU software version
1
、
C opy servo software "BOOT.ALI" and "nemo.bin" into USB memory ,
plug the USB memory into USB socket . Device upgrade servo software
automatically , Don't power off or disconnect power during the upgrade,
LCD show :
SERVO UPGRADING,,,DON'T PWR OFF
A round 1 minute
,
servo software upgrade completed and device change
to radio mode automatically
2
、
Delete the servo software in the USB and copy the MCU software
"CEM250MCU" (for CEM250) into USB memory
,
plug the USB memory
into USB socket
.
Device upgrade MB software software automatically
Don't power off or disconnect power during the upgrade, LCD show
:
Around 1 minute
,
MB software upgrade completed and device power
off automatically
,
disconnect the USB memory
.
MCU UPG