Philips CED1800BT, Руководство пользователя

Страница: 8 / 38

6
EN
w
/ //PRESET -
‡ Tune to the previous or next preset
radio station.
‡ Skip to the previous or next folder.
x
‡ Press to power on the system.
‡ Press and hold to power off the
system.
‡ Press to mute the speakers or release
them from mute status.
y
‡ Press to adjust the brightness of the
LCD screen.
3 Install the car
entertainment
system
Always follow the instructions in this chapter in
sequence.
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Note
‡
This system is designed for negative ground (earth) 12V
DC operation only.
‡
Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system
heats up during use.
‡
To avoid short-circuit: before you connect, make sure
that the ignition is off.
‡
Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
‡
Make sure that all loose leads are insulated with
electrical tape.
‡
Make sure that the leads do not get caught under
screws or in parts that will move (e.g. seat rail).
‡
Make sure that all ground (earth) leads are run to a
common ground (earth) point.
‡
Use only the supplied mounting hardware for a safe
and secure installation.
‡
,PSURSHUIXVHVFDQFDXVHGDPDJHRUÀUH:KHQ\RX
need to change the fuse, consult a professional.
‡
When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
‡
Never connect speaker wires to the metal body or
chassis of the car.
‡
Never connect speaker wires with stripes to one
another.