24
EN
12 Additional
information
Reset the system
If the system works abnormally, reset the
system to factory default settings.
1
Detach the front panel.
2
Press the
RESET
button with the tip of a
ball-point pen or toothpick.
»
All settings are reset to factory default.
Replace the fuse
If there is no power, check the fuse and replace
it if it is damaged.
1
Check the electric connection.
2
Remove the damaged fuse from the rear
panel.
3
Insert a new fuse with the same
specifications (15 A).
Note
•
If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In such
case, consult your Philips retailer.
Upgrade the firmware
Note
•
Power supply must not be interrupted during the
upgrade.
•
When the firmware upgrade succeeds, all settings are
restored to the factory default status.
Register your product
1
Go to www.philips.com/welcome.
2
Click the link of "
Register my product
"
(the exact wording of this link name may
vary in different languages).
3
Log in with your account on the prompt
Web page.
•
If you have no account for Club Philips,
create one first on this Web page.
4
Search your product with "
CE153DR/05
"
as the keyword.
5
Click the link of search result to access the
Web page for registering your product.
6
Fill in necessary information about this
product to complete the registration.
»
With the registration, you can get
information about software update and
product support at this Web page or
via your mailbox that is registered as
the account for Club Philips.
