36
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press
menu
.
2
Select
[ANSWER MACHINE]
>
[SETTINGS]
>
[RING DELAY]
, then
press
[SELECT]
to confirm.
3
Select a new setting, then press
[SELECT]
to confirm.
The setting is saved.
»
Note
Ensure that the answering machine is switched
•
on before this feature can be applied.
Tip
When you access the answering machine
•
remotely, you are recommended to set the
ring delay to
[ECONOMY]
mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.
Remote access
You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The remote access PIN code is the same as
•
your system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press
menu
.
From the handset
1
Press
during message playback to
enter the options menu.
2
Select
[DELETE]
, then press
[SELECT]
to confirm.
The current message is deleted.
»
Delete all old incoming messages
From the base
1
Press and hold in standby mode.
All old messages are permanently
»
deleted.
From the handset
1
Press
menu
on the handset.
2
Select
[ANSWER MACHINE]
>
[DELETE ALL]
, then press
[SELECT]
to
confirm.
The handset displays a confirmation
»
request.
3
Press
[OK]
to confirm.
All old messages are permanently
»
deleted.
Note
You can delete the read messages only. No
•
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
EN
