631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B0808
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
ColorWash
C4X9LEDLW
Page 1 of 2
4 1/2" X 9 1/8" Aperture, LED Color-Changing Matrix
®
Wall Washer
Lightolier is a Philips group brand
Features
1. Heat Sink Housing:
Die-cast aluminum, design thermally optimized to
reduce LED junction temperature to maintain light output, color and life.
2. LED Array:
Series of 48 high-power red, green, blue and amber (RGBA)
LEDs generate millions of colors and high quality white light at variable
color temperatures. Static colors and dynamic effects are programmable
by DMX controls. Average expected life, under normal operating conditions
is 50,000 hours with lumen maintenance of 70% of original light output.
Factory calibrated integral color sensor and self-adjusting feedback software
guarantee color consistency over life.
3. Aperture Cone:
Pre-finished aluminum, 55° visual and reflected cutoff.
Overlap flange accommodates different ceiling types, white or polished
flange. Precision mitered flange corner.
4. MicroBlend optics:
Internal collective mixing technology ensures smooth
washing and color uniformity and eliminates undesirable color fringing.
5. Aperture Lens:
Tempered glass, fine texture provides additional mixing at
the aperture and minimizes the appearance of the individual RGBA sources.
6. Torsiontite Springs:
Secure solid state lighting module tight against ceiling
surface without sagging. Accommodates ceilings from ½” to 2” thick.
7. Power Supply Unit/Slave Control Drive Module:
PSU: 120VAC 50/60
Hz., Class 2, high power factor, FCC Class B approved, short circuit protection.
SCD: low voltage DC, provides power and data to control LED array with a
maximum of 8 LED channels. Electronics are enclosed in a black extruded
aluminum housing providing optimal thermal dissipation for reliable operation
and long life. Module is replaceable from below the ceiling.
8. DMX Connectors:
Two RJ45 jacks mounted at one end of PSU/SCD module
provide DMX512-In and DMX512-Out connections (see page 2). Uses standard
shielded, plenum rated, CAT5 round, 8 conductor, twisted pair, network
cables (not supplied).
9. Flexible Metal Conduit/Quick Connector:
Quick connector for easy field
data connection.
10. Mounting Frame:
0.048" thk., galv. steel.
Features (continued)
11. Frame Vertical Adjustment Mechanism:
Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
12. Mounting Bars:
0.048" (18-ga.) Pre-installed, telescoping bars extend to
30"long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies
installation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.
13. Junction Box:
UL and cUL Listed for through branch circuit wiring with max.
of (8) No. 12 AWG, 90ºC supply conductors.
14. Thermal Protector:
Meets (NEC) UL and (CEC) CSA requirements. Insulation
must be kept 3" away from fixture sides and wiring compartments and must
not be placed above fixture in a manner which will entrap heat.
Electrical
120V: Input Watts: Must be circuited for 75W Max.
Labels
cULus Listed for dry locations. I.B.E.W.
Ordering Information
Solid State Lighting Unit
Light Source
Frame-In Kit
Input Voltage
White
Polished Flange
Finish
C4X9LEDLWCLW
C4X9LEDLWCLP
Specular Clear
RGBA LED Array
C4X9CCLEDLW1
120
C4X9LEDLWCCLW
C4X9LEDLWCCLP
Comfort Clear
For 277V, use Stepdown Transformer
Cat. No. 7997
C4X9LEDLWCCDW
C4X9LEDLWCCDP
Comfort Clear Diffuse
10 1/2"
(267mm)
5 3/4" (146mm)
4 1/2" (115mm)
8 13
7
1
9
11
12 2
6
3
10 1/2" (93mm)
9 1/8" (93mm)
5
9 5/16" (237mm)
4
10
Vertical Adjustment
5/8" (16mm)
2 7/8" (73mm)
20" (508mm) to 30" (762mm)
18 1/2" (470mm)
2" (51mm)
max. ceiling thk.
13 3/8" (340mm)
14
Ceiling Cutouts: 5 3/8" x 10 1/8"
