Philips CAD310, Руководство по обслуживанию

Страница: 6 / 28

1-6
Preparations
For so me VW/Au di or Opel( Vauxhall)
car mo dels, you m ay need t o modify
wiring of the supp lied power cord as
illustra ted, or else the memory of the
unit ma y be lost after you po wer off.
Contac t your aut horized ca r dealer
before installing this unit.
Wiring Diagram
Fuse 15A
Aux-in
L ( White )
R ( Red )
Connector
Line-out (Gray)
R(Red)
L(White)
Antenna
AUDI O OUT
A mplifier
Ground Lead
To car b)
Cont12V DC
Left Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Front)
Right Speaker
( ) Rear
White/
Black
Stripe
White Gray/
Black
Stripe Green/
Black
Stripe
Gray Green Purple/
Black
Stripe Purple
Black
Yello w
Ignition key
+12V DC When ON/ACC
Red
Bl ue
Motor/Electric Antenna relay control Lead
Amplifier relay control Lead
ISO C3 Connector
ISO Connector
Black
Origin al wiring
M odified wirin g
Red
Yellow Yellow
R ed
Red
Yellow Yellow
R ed
PHILIPS CD changer
1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully
Cut the connector, connect the colored leads of the power cord to the car battery,
before connecting, incorrect connection may cause
serious damage to this unit.
as shown in the colour code table below for speaker and
power cable connections
Using the ISO Connector
Connector Connector
Battery 12V (+)/yellow
Auto Antenna/blue
ACC+/red
Ground/black
Rear Right(+)---Purple
Rear Right(-)---Purple/Black Stripe
Front Right(+)---Gray
Front Right(-)---Gray/Black Stripe
Front Left(+)---White
Front Left((-)---White/Black Stripe
Rear Left(+)---Green
Rear Left(-)---Green/Black Stripe
www.freeservicemanuals.info