Philips BTS7000/10, Руководство пользователя

Страница: 15 / 18

13
English
EN
6 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
• Total output power: 100W RMS
(+/- 0.5 dB, 30% THD) / 80W RMS
(+/- 0.5 dB, 10% THD)
• Frequency response: 63 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUDIO IN: 400 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
•
Bluetooth profiles: A2DP
• Bluetooth version: 3.0 (EDR)
USB
• USB connector (not for media play):
• Used for software upgrade of this
product
• Used to charge a USB device
• 5V 1A
Main unit (left and right speakers)
•
Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 50 W
•
Standby power consumption: ≤ 0.5 W
• Speaker impedance:
• Woofer: 4 ohm
• tweeter: 8 ohm
• Speaker drivers: 2 x 101.6 mm (4") woofer
+ 2 x 25.4 mm (1") tweeter
•
Dimensions (WxHxD):
160 x 305 x 160 mm
•
Weight: 4.4 kg
Remote control batteries
• 1 x CR2025
Standby information
• When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.
• The power consumption in standby or
networked standby is less than 0.5W.
• To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
• To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).