Page 8 of 56
Ver 1.0 Update : 2 Jun 2007
6.
TIMER
Setting the Timer (Standby mode only)
6.1.
In any mode, press and hold
TIMER
key until “SET TIMER” scrolls on the display.“SELECT
SOURCE” scrolls on the display. Current source icon on.
6.2.
Press SOURCE key on the set repeatedly to select the source ,DISC,TUNER,USB or CARD .
6.3.
Press the
TIMER
key to confirm. The hour digits start flashing.
6.4.
Press
Album+
key repeatedly to adjust the hour
.
Press
Timer
key to confirm and the minutes
digits start flashing.
6.5.
Hold down or press ALBUM + key repeatedly to adjust the minutes
.
Press Timer key to confirm.
The Timer is now set and activated. icons on.
6.6.
To exit timer-setting mode without storing, press STOP button.
6.7.
During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting
mode automatically.
6.8.
Activating and deactivating the Timer function by Electronic tact key TIMER :
Press TIMER (Timer) key on the set repeatedly to activate or deactivate the alarm.
If activated,
icons on.
If deactivated,
icons off.
Remark:
In Stand By mode – Backlight will be on when setting Timer! In case of /37 version the
message "AM" or "PM" will be shown in front of the set time.
The volume of the timer will start to increase from the minimum level until level 12.
If the set is on at the set time, the set will switch to the selected source.
There should be no Timer source as BLUETOOTH.
When you select Timer source as USB / SD Card, when there is no USB / SD Card and it will
turn to FM accordingly.
When you select FM, AM, in Timer mode it will activate as your previous selected station
The number key on the remote control is deactivate in this mode.