background image

19

EN

9 Troubleshooting

Warning

 

Never remove the casing of this device.

To keep the warranty valid, never try to repair 
the system yourself. 
If you encounter problems when using this 
device, check the following points before 
requesting service. If the problem remains 
unsolved, go to the Philips Web page (www.

philips.com/support). When you contact Philips, 

make sure that the device is nearby and the 
model number and serial number are available.

No power

 

Make sure that the AC power cord of the 
device is connected properly.

 

Make sure that there is power at the AC 
outlet.

 

As a power-saving feature, the system 
switches off automatically 15 minutes after 
track play reaches the end and no control 
is operated.

No sound or poor sound

 

Adjust the volume.

 

Check that the speakers are connected 
correctly.

 

Check if the stripped speaker wires are 
clamped.

No response from the unit

 

Disconnect and reconnect the AC power 
plug, then turn on the unit again.

 

As a power-saving feature, the system 
switches off automatically 15 minutes after 
track play reaches the end and no control 
is operated.

Remote control does not work

 

Before you press any function button, first 

select the correct source with the remote 
control instead of the main unit.

 

Reduce the distance between the remote 
control and the unit.

 

Insert the battery with its polarities (+/– 

signs) aligned as indicated.

 

Replace the battery.

 

Aim the remote control directly at the 
sensor on the front of the unit.

No disc detected

 

Insert a disc.

 

Check if the disc is inserted upside down.

 

Wait until the moisture condensation at 
the lens has cleared.

 

Replace or clean the disc.

 

Use a finalized CD or correct format disc.

Cannot display some files in USB device

 

The number of folders or files in the USB 

device has exceeded a certain limit. This 
phenomenon is not a malfunction.

 

The formats of these files are not 

supported.

USB device not supported

 

The USB device is incompatible with the 
unit. Try another one.

Poor radio reception

 

Increase the distance between the unit and 
your TV or other radiation sources.

 

Fully extend the FM antenna.

Music playback is unavailable on this unit even 
after successful Bluetooth connection.

 

The device cannot be used to play music 
through this unit wirelessly. 

The audio quality is poor after connection 
with a Bluetooth-enabled device.

 

The Bluetooth reception is poor. Move the 
device closer to this unit or remove any 
obstacle between them.

Bluetooth cannot be connected with this unit.

 

The device does not support the profiles 

required for this unit. 

 

The Bluetooth function of the device is 
not enabled. Refer to the user manual of 

the device to find out how to enable the 

function.

 

This unit is not in pairing mode. 

 

This unit is already connected with another 
Bluetooth-enabled device. Disconnect that 
device and then try again.

Содержание BTM2312

























Отзывы: