Philips BT3600, Руководство пользователя

Страница: 8 / 16

6
EN
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
Note
•
Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•
The speaker can memorize a maximum of four paired
devices. The fifth paired device will replace the first one.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range. Keep away
from any other electronic device that may cause
interference.
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
•
Make sure that no audio-in cable is connected to the
AUDIO IN
socket.
Connect a device through NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1
Turn on the speaker.
»
The LED indicator flashes blue.
2
Enable the NFC feature on your Bluetooth
enabled device (refer to the user manual
of the device).
3
Tap the NFC tag on the speaker with the
NFC area of your Bluetooth device.
4
On your Bluetooth device, accept the
pairing request with "BT3600". If necessary,
input "0000" as the pairing password.
5
Follow the on-screen instructions to
complete the pairing and connection.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
Connect a device manually
1
Turn on the speaker.
»
The LED indicator flashes blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3
When
[Philips BT3600]
is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
• If you fail to find [Philips BT3600] for
pairing, press and hold MULTIPAIR
for two seconds to enter pairing mode,
and then try again.
To disconnect the Bluetooth-enabled device:
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» The speaker beeps twice, and the LED
indicator flashes.