background image

16

3. Image Optimization

Options>Theft Deterrence

 - Theft Deterrence 

Pane will only be active when selecting Theft 

Deterrence Mode from the drop-down Plug-in 

menu.

To enable Theft Deterrence, click on 

On

 button 

to bring up the following screen:
•  User can enter PIN between 4 and 9 digits 

numbers only. 

•  After entering PIN, Accept button takes 

user to the pop-up dialog box on the 

following page. 

•  Minimum minutes set to 5. Slider set to 5 

by default. 

•  Does not require the display be attached 

to a different host to go into Theft 

Deterrence mode.

After creating PIN, the Theft Deterrence pane 

will indicate Theft Deterrence Enabled and 

provide PIN Options button:
•  Theft Deterrence Enabled is displayed. 
•  Disable Theft Deterrence Mode opens 

pane screen on next page. 

•  PIN Options button only available after 

user creates PIN, button opens secure PIN 

web site.

Help menu

Help>User Manual

 - Will only be active when 

selecting User Manual from the drop-down 

Help menu. On a non-supported display 

capable of DDC/CI, only the Help and Options 

tabs are available.

Help>Version

 - Will only be active when 

selecting Version from the drop- down Help 

menu. On a non-supported display capable of 

DDC/CI, only the Help and Options tabs are 

available.

Содержание Brilliance 231B4LP















































Отзывы: