Philips Brilliance 190SW9FB/27, Руководство по обслуживанию

Страница: 83 / 90

HUDSON 9 83
Production alignement specification
CIE coordinates (x,y)
11500K
x = 0.270 ± 0.005
y = 0.281 ± 0.005
9300K
x = 0.283 ± 0.005
y = 0.297 ± 0.005
8200K
x = 0.291 ± 0.005
y = 0.306 ± 0.005
7500K
x = 0.298 ± 0.005
y = 0.314 ± 0.005
6500K/sRGB
x = 0.313 ± 0.005
y = 0.329 ± 0.005
sRGB
x = 0.313 ± 0.005
y = 0.329 ± 0.005
5000K
x = 0.345 ± 0.005
y = 0.357 ± 0.005
Quality Inspection specification:
CIE coordinates (x,y)
9300K
x = 0.283 ± 0.015
y = 0.297 ± 0.015
6500K/sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
5. Mechanical characteristics
5.1 Cosmetic - Philips ID
5.2 Mechanical data files - ProE files required
5.3 Location of Philips logo - Per Philips make-up sheet
5.4 Gap between panel and front bezel < 0.8 mm (typ)
5.5 Location of Control icons - Per Philips Graphic sheet
5.6 Color for resin/paint - Per Philips make-up sheet
5.7 Resins
z RoHS required
z
WEEE required.
z Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.8 If paint is used
z RoHS required
z WEEE require
z If new painting type need to implement, refer to UN-D 1235.
5.9 Plastic mold tooling
z Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines,
gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
z
Painting to cover up cosmetic defects due to molding is strongly discouraged.
z China RoHS mark requested.
5.10 Plastics flammability
z
Base / Pedestal to be Flame Retardant UL 94-HB.
z All major plastic parts (bezel, back cover, base) need to be molded from same resin.
z Plastic resin type selection should be referred to “TY R83-2-9002-1”.