Provider setup menu (cont.)
Alarm settings
Apnea
Off, 10, 20, 30 sec
Patient disconnect
Off, 15, 60 sec
Low min vent
Off (0) to 99 lpm in 1.0 increments
Low Vte
On, Off
System settings
Backlight
On, Off
Language**
English, Italian, Spanish, German, French, Danish, Dutch,
Norwegian, Swedish, Finnish, icons
hPa/cmH
2
O
hPa, cmH
2
O
Setup parameter display
1
Leak, RR, MinVent, Vte
Humidifier
0 to 5
Reset therapy hours*
Yes, No
Reset blower hours
Yes, No
Provider mode
2
On, Off
*for firmware version 2.11 or higher
**for firmware version 2.24 or higher
1. Setup parameter display
You can select which measured parameters will display on the
Monitor screen. Choose from
Leak
,
RR
(Respiratory Rate),
Min vent
, or
Vte
. See the Measured Parameter section of the
User Manual for more information.
2. Provider mode
You can choose “
on
” or “
off
” to enable or disable provider
mode. Selecting “
on
” will unlock the device and give access
to all ventilation settings in Setup menu. Selecting “
no
” will
lock the device so the patient does not have access to his
ventilation settings.
