3-5CM
c
b
a
h
g
d
e
f
1
2
3
A
3-5CM
10 sec.
B
3-5CM
10 sec.
3-5CM
c
b
a
h
g
d
e
f
1
2
3
A
3-5CM
10 sec.
B
3-5CM
10 sec.
4
Preparation for use
•
Wash hair with shampoo and conditioner and blow dry it.
•
Use heat protection product and comb your hair with
large-toothed comb.
•
Use the straightener only when your hair is dry.
•
Frequent users are recommended to use heat protection
products when straightening.
•
Ensure that you select a temperature setting that is
suitable for your hair. Please refer to the Hair Type table
below. Always select a lower setting when you use the
straightener for the first time.
Hair Type
Temperature Setting
Thick
200 °C to 230 °C
Normal
170 °C to 190 °C
Fine
130 °C to 160 °C
5
Straighten your hair ( Fig.2 )
1
Connect the plug to a power supply socket.
2
Slide the closing lock (
h
) downwards to unlock the
appliance.
3
Press and hold the button (
f
) until the display screen
lights up.
»
The default temperature setting 160°C (
d
) is
displayed.
4
Press the
or
button (
e
) to select your desired
temperature setting.
»
When the appliance is heating up, the temperature
digits will blink. The digits stop blinking when the
heating plates have reached the selected temperature.
»
The appliance will heat up in 30 seconds.
5
The ion function (
b
) is activated when the appliance is
switched on, which provides additional shine and reduces
frizz.
»
You may smell a special odor and hear a sizzling noise.
It is common because they are caused by the ion
generator.
6
Comb your hair and then start by clipping your blow dried
hair into sections not wider than 5cm.
Note:
For thicker hair, it is suggested to create more sections.
7
Place one section of hair in between the heating plates
(
a
) and press the handles firmly together.
8
Slide the straightener down the length of the hair in a
single motion (max. 5 sec) from root to end, without
stopping to prevent overheating.
9
To straighten the rest of your hair, repeat steps 6 to 8 until
you achieve the desired look.
10
To finish your hair styling, mist with a shine spray or
flexible hold hair spray.
Tip
: Do not brush your hair while setting your hair style.
6
Curl your hair ( Fig.3 )
To create inward/outward curls:
1
Take a hair strand and clip up the rest of hair.
2
Start near the hair roots. Place the strand of hair between
the heating plates (
a
).
3
(
Fig.3-A
) Turn the straightener inwards toward your face
and make a 360-degree turn.
(
Fig.3-B
) To create outward curls, turn the straightener
away from your face and make a 360-degree turn.
Notes:
•
Do not touch the surface above or below the heating
plates as they are hot. If necessary, use cool tip only.
•
The beginning section of your hair should be completely
wrapped around the straightener before sliding the hair
down.
4
Your hair strand is fully wrapped around both sides of the
straightener. Make sure the hair tip is sticking out.
5
Pull the straightener downwards along the hair slowly.
Ensure the strand of hair is not slipping off the plates.
Tips:
•
You may use the cool tip (
c
) to assist in the
360-degree turn.
•
Hold the straightener horizontally ( parallel to the floor )
so that the hair won’t fall out.
•
You may use the cool tip to fix your hair strand in place.
•
Gently relax the grip on the handle as you rotate so that
you can easily turn the straightener.
After use
:
1
Switch off the appliance and unplug it.
2
Place it on a heat-resistant surface until it cools down.
3
Clean the appliance and heating plates by damp cloth.
4
Close the heating plates (
a
) and slide the closing
lock (
h
) to lock the appliance.
5
Keep it in a safe and dry place, free of dust. You can also
hang it with the hanging loop (
g
).
Note
: The appliance has auto shut-off function. It switches
off automatically after 30 minutes without clamping.