Philips BeNear CD6952B, Руководство пользователя

Страница: 41 / 52

English
EN
39
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
•
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
Change the PIN code
1
Select
[Menu]
> >
[Remote access]
>
[Change PIN]
, then press
[OK]
to confirm.
2
Enter the old PIN, then press
[OK]
to
confirm.
3
Enter the new PIN code, then press
[OK]
to confirm.
4
Enter the new PIN code again, then press
[Save]
to confirm.
» The setting is saved.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Select [Menu] > > [Remote access] ,
then press [OK] to confirm.
2
Select
[Activate]
/
[Deactivate]
, then press
[OK]
to confirm.
» The setting is saved.
Set the sound quality of the
message
You can adjust the sound quality of the
messages received from the answering machine.
1
Select
[Menu]
> >
[Msg quality]
, then
press
[OK]
to confirm.
2
Select the new setting, then press
[OK]
to
confirm.
»
The setting is saved.
Note
•
The sound quality can only be adjusted before
recording starts.
Set the ring delay
You can set the number of times the phone
rings before the call goes to the answering
machine..
1
Select
[Menu]
> >
[Ring delay]
, then
press
[OK]
to confirm.
2
Select a new setting, then press [OK] to
confirm.
»
The setting is saved.
Note
•
Make sure that the answering machine is switched on
before this feature can be applied.
Tip
•
When you access the answering machine remotely,
you are recommended to set the ring delay to [Toll
saver] mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.