Philips BDP9100/12, Руководство по обслуживанию, Страница: 26 / 55

Firmware Upgrading Procedure
5-2-3 Drive Test
z
Read Drive ID through SATA Cable:
If Drive ID test fail, the error code (
ERR 01 ) will be showed on VFD.
If test is passed, go on to next process test.
5-2-4 Ethernet phy Test
z
Ping local host to make sure the chip is Ok:
If Ping result ailed, the error code ( ERR 02 ) will be showed on VFD.
If test is passed, go on to next process test.
5-2-5 CEC MCU Test
z
Read CEC MCU version:
If read version failed, the error code (
ERR 03 ) will be showed on VFD.
If test is passed, go on to next process test.
5-2-6 6 ch audio DAC Test
z
Read version of audio DAC:
If audio DAC test failed, the error code ( ERR 04 ) will be showed on VFD.
If test is passed, the VFD will show “ ALL PASS” for 10 second and then
back to Standby mode.
REV. A 25