44
LIST OF SETTINGS
Category
Menus / Options
Description
Compresses range between soft and
loud sounds.
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
Activates the Night Mode.
Deactivates the Night Mode.
Sets the sampling rate for outputting
PCM audio from the digital output
(coaxial).
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Select “On” to enjoy stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
Only audio for the primary video will
be output.
When playing back a BD-video which
only contains primary audio, the
audio output will be the same case as
“Primary Audio Only” even if the “Blu-
ray Disc Audio” is set to “Mix Audio
Output”.
HDMI Audio
• This feature is
available only when
the display device is
connected by an
HDMI cable.
• Refer to page 49 for
more information.
Sets the audio format for sound
output from the HDMI OUT jack.
Digital Out
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
• Refer to page 51 for
more information.
Sets the audio format for the sound
output from the DIGITAL OUT
(COAXIAL) jack.