22
•
[Music]
- Enable Neo 6 post processing to the
music mode.
•
[Off]
– Disable Neo 6 post processing.
[HDMI Audio]
Select an HDMI audio output when you connect this
player and the TV/audio device with an HDMI cable.
•
[Bitstream]
– If the connected HDMI device
supports the appropriate HD audio decoder,the
original audio format on the disc is sent.
Otherwise, LPCM is sent.
•
[Auto]
– Detect and select the best supported
audio format automatically.
[Digital Audio]
Select an audio format for the sound output from the
DIGITAL OUT jack (coaxial/optical).
•
[Auto]
- Detect and select the best supported
audio format automatically.
•
[PCM]
- The audio device does not support
multi-channel format. Audio is downmixed to
two-channel sound.
•
[Bitstream]
- Select the original audio to
experience Dolby or DTS audio (BD-video
special sound effect is disabled).
Note
Ensure that the audio format is supported by the disc
•
and the connected audio device (amplifier/receiver).
When
•
[Bitstream]
is selected, interactive audio like
button sound is muted.
[PCM Downsampling]
Set the sampling rate for PCM audio output from the
DIGITAL OUT jack (coaxial/optical).
•
[On]
- PCM audio is down-sampled at 48kHz.
•
[Off]
- For BD or DVD recorded in LPCM
without copyright protection, two-channel audio
signals up to 96 kHz are output as LPCM signals
with no conversion.
Network setup
1
Press .
2
Select
[Setup]
, and press
OK
.
3
Select
[Network]
, and press .
•
[Animation]
– Contrast color setting. Ideal for
animated pictures.
[Blu-ray 3D video]
Set to 2D or 3D output when playing a Blu-ray 3D
disc.
•
[Auto]
- Enable 3D output if a Blu-ray 3D disc is
loaded and the TV is 3D and HDMI compliant,
and the TV is connected through an HDMI
cable. Otherwise, only 2D output is made.
•
[Off]
- Turn off 3D output to enable 2D output.
Audio setup
1
Press .
2
Select
[Setup]
, and press
OK
.
3
Select
[Audio]
, and press .
4
Select an option, then press
OK
.
5
Select a setting, then press
OK
.
To return to the previous menu, press
•
BACK
.
To exit the menu, press
•
.
[Night Mode]
Increase a soft sound level such as dialogue to make it
easier to hear at a low volume, while simultaneously
decreasing a loud sound level.
•
[Auto]
- Detect and select a best sound level at
a low volume. Applicable to tracks with Dolby
TrueHD audio only.
•
[On]
– For quiet viewing at night.
•
[Off]
– For surround sound with a full dynamic
range.
Note
Applicable only to Dolby encoded DVD-video or BD-
•
video.
[Neo 6]
A post processing by DTS to generate a surround
sound effect from 2 channel audio.
•
[Cinema]
– Enable Neo 6 post processing to
the cinema mode.
EN
