User Manual BDL6545AT
RETURN TO THE CONTENTS
10. Now you have completed the schedule settings. The on-screen display should look like the illustration
below:
11. Press the
EXIT
button and the menu will close and the schedule settings will take effect.
To set up more schedule items, repeat the steps above except that a different schedule item should be
selected (schedule item #2 ( 2) through #7 ( 7)) in step 2.
Note:
• Seven scheduling options are available so that you can choose between different video input modes for different
schedules during the week. For example, VGA input on a Monday, HDMI on Tuesday to Friday, S-Video for
weekends.
• If you do not want to use a power on time, select "--" for the power on hour slot, and "00" for the minute slot. The
display will only turn off at the time you set.
• If you do not want to use a power off time, select "--" for the power off hour slot, and "00" for the minute slot. The
display will only turn on at the time you set.
• If no input source is selected, the default input source (Video) will be used.
• If Every day is selected, the display will turn on everyday regardless of other day settings (e.g Mon, Tue, Wed..., etc.).
• Should schedule periods overlap, the power on time has priority over power off time. For example, if schedule item
#1 sets the display to power on at 10:00 AM and off at 5:00 PM, and schedule item #2 sets the display to power
on at 4:00 PM and off at 9:00 PM on the same day, then the display will power on at 10:00 AM and off at 9:00
PM.
• If there are multiple schedule items programmed for the same time period, then the highest numbered schedule item
has priority. For example, if schedule items #1 and #2 both set the display to power on at 7:00 AM and off at 5:00
PM, then only schedule item # 1 will take effect.
Monitor ID
Set the ID number for controlling the display via the RS232C connection. Each display must have a unique ID
number when multiple BDL6545AT displays are connected. Each monitor’s ID is defined by its position within
the matrix – starting on the top row, working left to right. The top left display will have an ID of 1. When you
reach the end of the row, the next number will refer to the display one row down, starting at the left.
DDC/CI
Choose to turn
On
or
Off
the DDC/CI communication function. Select On for the
SmartControl II
software use.
Use the
UP
/
DOWN
button to make selection.
Smart power
Set the display to reduce the power consumption automatically. Setting to
High
will bring the most power
savings.
Use the
UP
/
DOWN
button to toggle between
Auto signal detection
•
Off
•
Medium
•
High
