Philips BDL4230E/00, Руководство по обслуживанию

Страница: 70 / 122

70 BDL4230E LCD
General Product Specification
2.4 Service mode
Detailed technical specification refers to Service delta technical specs.
x
Software Update:
¾
Wireless data cloning (IR transmission).
¾
Through RS-232
2.5 Power Supply
2.5.1 Power supply features
x
AC line voltage range - 90Vac ~ 264Vac.
x AC line frequency range - 50-60 Hz r 3 Hz.
x DC tact switch - Minimal power consumption when switch off
x AC mains switch - No power consumption when switch off.
x
Inrush current - < 40A at 240Vac when cold start.
x
Leakage current - < 0.5mA at 240Vac.
x
Power factor correction - According to EN61000-3-2
2.5.2 Power consumption
x
Normal on - TBD w (typical), TBD w(max.)
x
Standby - < 1w, RC standby mode
x
Switch off (DC or TACT) - < 1w, RC in-active
x
Switch off (AC mains) - < No power consumption.
2.5.3 Display DPM standby (D-sub & HDMI input)
z
DPM - The Display enters DPM off (sleep) mode when no H&V sync, one of H-sync /
V-sync input or digital clock is absent. “No Video Input” message appears before
entering DPM mode. A delay of 30 seconds before entering the power saving
state is required to avoid misunderstanding of display resolution and timing mode
changes.
z
Recovery from DPM - Power & function recover when either H & V syncs or digital
clock are detected.
z Standby - The Display enters “AV standby mode” when it’s switched off by RC.
“Standby/Power” key or SLEEP TIMER function is activated or no AV signal
input for 30 minutes.
z Recovery from Standby - Power & function recovers when RC “Standby” or “CH +/-” or
“AV” is pressed. Hidden key control “Menu” or “CH +/-” key is
toggled.
2.6 User Control Interface
Controlled via top control keypads or remote control or RS-232.
2.6.1 Hidden controls
It can’t be easily accessed in front of the set.
TBC