Philips Azur GC4238, Руководство по обслуживанию, Страница: 2 / 4

GC4238
DIAL 1
RATTLE SPRING 2
BACKPLATE 3
BACKPLATE COVER 26
CORDSET 4
BALL SWIVEL 5
Remove Screw A
Remove Screws B1, B2
FILLING DOOR 6
INLAY 7
OPERATION KNOBS 8
ASO UNIT 9
Remove Screw A
Remove Backplate 3, 26
DISASSEMBLY ADVICE
REPAIR INSTRUCTIONS
- Due to the high voltage of the iron, ONLY the specified cordsets must be used.
- Thermostat (Pos 116) fitted to the soleplate (Pos 23) was pre-adjusted by the
suppliers and secured by glue. To avoid mal-function of the iron, NEVER adjust
the thermostat.
- No information about the type number and voltage is stamped onto the typeplate.
When replacing the back plate (typeplate is at the bottom), engrave at least the type
number & voltage on the typeplate with a sharp object.
- Parts with numbers from 103 and higher cannot be ordered separately.
OPTIONAL (accessories)
- No specific issues
SLIDE UNIT 10
NEEDLE SET 11
TANK SEAL 12
HANDLE 13
SELF CLEAN BUTTONS 14
SPRAY NOZZLE ASSY 15
PUMP ASSY 16
Remove Screw A
Remove Backplate 3, 26
Remove Inlay 7
Remove Operation knobs 101, 102
Remove Screws C1, C2
Remove Slide Unit 103, 104
Remove Needle set
105, 106, 107, 108, 109
Remove Screws D1, D2
THERMOSTAT BUSH 17
WATER TANK 18
SAFETY LIGHT 28
Remove Screw A
Remove Backplate 3, 26
Remove Screw J
Remove Safety light 28
Remove Inlay 7
Remove Operation knobs 101, 102
Remove Screws D1, D2
Remove Handle 13
Remove Screws E1, E 2
Remove Water tank 18
Remove Screw F
SOLEPLATE COVER 19
ISOLATION PLUG 20
SOS SEAL 21
DOSING SEAL 22
SOLEPLATE ASSY 23
Remove Screw A
Remove Backplate 3, 26
Remove Inlay 7
Remove Operation knobs 101, 102
Remove Screws D1, D2
Remove Handle 13
Remove Screws E1, E2
Remove Water tank 18
Remove Screw F
Remove Heat shield
Remove Screws G1, G2
Remove Soleplate cover 19
2-4