Philips Azur Cordless HI570, Руководство пользователя

Страница: 11 / 110

C
2 Take the iron from the stand.
3 HI575 only: put the iron back on the stand when the
temperature light starts blinking.This indicates that the iron
has cooled down below the set temperature.
◗
When you stop ironing for a while, always put the iron on the
stand to allow it to heat up again.
◗
When you use the shot-of-steam or turbo-steam function, the
iron may cool down rather quickly.We advise you to iron in
corded mode when using these functions.
Steam ironing
1 Make sure that there is enough water in the water tank.
2 Select the recommended ironing temperature (see section
'Setting the temperature').
3 Put the iron on the stand.
C
4 Put the mains plug in the wall socket.
The iron starts heating up.
◗
As soon as the water in the water tank is hot enough for steam
ironing, the temperature light goes out.
C
5 Set the steam control to the required position to start steam
ironing.
◗
Steam ironing is only possible at higher ironing temperatures
(temperature settings
2
to MAX).
◗
Select the recommended steam setting:
B
1 - 2 for moderate steam (temperature settings
2
)
B
3 - 6 for maximum steam (temperature settings
3
to MAX)
◗
During steam ironing the temperature light goes on from time to
time.This indicates that the iron is heating up to the set
temperature.
Ironing without steam
◗
To iron without steam, proceed as described for steam ironing but
set the steam control to position 0 (no steam).
1 Select the recommended ironing temperature (see section
'Setting the temperature').
ENGLISH
11
LINEN
HILO
SILK
SEDA
NYLO
N
NILON
WOOL
LANA
COTT
ON
ALGO DON
M A
X
M IN