Philips AZB500, Руководство пользователя

Страница: 14 / 20

12
EN
»
After the search is complete, the
first stored radio station is broadcast
automatically.
3
Press / to select a station, and then
start listening.
Program radio stations
1
Tune to a DAB radio station.
2
Press
PROG
to activate the programming.
3
Press / to select a preset sequence
number.
4
Press
PROG
to confirm.
»
The radio station is stored with the
selected sequence number.
5
Repeat steps 1-4 to program more radio
stations.
Note
•
If you store a radio station with the sequence number
of another one, the earlier one is overwritten.
Display DAB information
On the display of DAB broadcasting, the first
line shows station name, and the second line
shows the service information for the current
station.
Press
DISPLAY
repeatedly to cycle through the
following information (if available).
• Dynamic label segment (DLS)
• Signal strength
• Program type (PTY)
• Ensemble name
• Frequency
• Signal error rate
• Bitrate codec
• Time
• Date
Use DAB menus
1
In DAB mode, press MENU to access the
DAB menus.
2
Press / to toggle through the menus.
• [FULL SCAN] :Scan for the DAB
stations.
• [MANUAL] : Tune to a station manually.
• [DRC] :Enable or disable DRC.
• [PRUNE] : Remove invalid stations
•
[SYSTEM]
: Access system setting menu.
3
Press OK to enter the menu.
Re-scan for stations
Full scan is used to perform a wide range
search for DAB radio stations.
• Press OK to activate the automatic search.
» This product automatically stores radio
stations with sufficient signal strength.
Tune to a station manually
With this feature, you can tune to a specific
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained with
this feature.
1
Press
OK
to access the station list.
2
Press / to select a station.
3
Press
OK
to confirm the option.
DRC (Dynamic Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
Press OK access the sub-menus.
2
Press / to select an option.
• [DRC OFF] : No compensation applied.
• [DRC LOW] : Medium compensation
applied.