Philips AZ6000/05, Руководство пользователя

Страница: 10 / 20

DAB RADIO
AUTOSCAN
Autosan local - scans all the UK frequencies (in default setting)
Autosan full - scans Band III frequencies.
•
To start Autoscan local , briefly press SMART SCAN .
•
To start Autoscan full , press and hold SMART SCAN until
appears.
=
Display shows and the number of stations having
been detected. A progress bar appears, indicating the scanning
progress.
Helpful hints:
– When moving to another place, you can use Autoscan to refresh
the list of available stations.
– If no station is found during autoscan, the display will show .
(See Troubleshooting )
MANUAL TUNE
With Manual Tune, you can quickly access your desired station
according to its channel number.
1. Press DAB MENU to enter the advanced setup menu.
2. Push left/right
1
,
2
once or more (or
5
,
6
on the remote control)
and then, ENTER to select Manual tune .
=
Display shows the first channel number and the respective
frequency.
3. If necessary, press
1
,
2
once or more to select your desired
channel number in the list of available channel numbers.
4. Press ENTER to confirm your selection.
=
Display shows the channel number and multiplex name. A bar
appears, showing reception strength.
5. Press ENTER again to tune to the station.
To improve reception
1. Press ENTER when tuning to a station.
=
A tuning indication appears:
maximum reception
good reception
inadequate reception
no reception
2. To improve reception, extend, incline and turn the telescopic aerial.
Helpful hints:
-
If any action is not confirmed within 7 seconds, it will be cancelled automatically.
TUNING / RETUNING
10
AZ 6000/05
page
10
DAB
MENU
MODE
PROG
SMART
SCAN
DBB
DAB
MENU
MODE
PROG
SMART
SCAN
DBB
AZ6000_05-01 6/16/04 14:39 Page 10