Philips AZ5155, Руководство пользователя

Страница: 17 / 25

CASSETTE RECORDER
17
English
AZ 5130
page
17 AZ 5155
page
17
1. Set the source selector to TAPE/OFF .
2. Press STOP•OPEN
9 /
to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY
1
and playback will start.
5. Adjust the sound using the VOLUME and DYNAMIC BASS
BOOST controls.
6. For brief interruptions, press PAUSE
;
. Press PAUSE
;
again to
resume playback.
7. By pressing
5
or
6
,fast winding of the tape is possible in both directions.
8. To stop playback, press STOP•OPEN
9 /
™
The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/OFF position (with the
cassette keys are released) to switch off the set.
General information on cassette recording
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC
II
)
or METAL (IEC
IV
) type cassettes. For recording you should
use NORMAL type cassettes (IEC
I
) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to
avoid jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME
and DYNAMIC BASS BOOST controls will not affect the
recording in progress.
• No recording will take place during the 3 seconds, when the
leader tape passes the recorder heads.
Notes : - No recording will take place during the 7 seconds in the
beginning of the tape.
• To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in
front of you and break out the left tab. Recording on this side is no longer possible.
1
CASSETTE RECORDING
CASSETTE PLAYBACK
SEARCH
E
INCREDIBL
SURRO ND
ULTRA B NAMIC BASS BO
OST
RECORD
PLAY
SEARC
H
STOP-
OP
EN
PA
US
E
AZ5155/01 eng 7/18/03 8:58 PM Page 17