Philips AZ5130 Expanium, Руководство по обслуживанию

Страница: 8 / 31

3 - 4
CD/VCD/MP3-CD
English
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order
.
1.
In stop mode, press
PROG
(on remote control) to enter programme setting.
™
PROG
will flash on the display
.
2.
Press
digits 0 - 9
on the remote control or
/
§
§
§
§
to select the desired track.
3.
Press
PROG
to store the select track. The number “
XXX
” represents the track no.
•
Repeat steps
1
to
3
to store other tracks.
4.
Press
9
to end programme setting.
™
PROG
will remain on the display
.
•
Press
PROG
(on remote control)
in stop mode to review the programme sequence.
5.
Press
2;
to play the programmed tracks.
•
If you press
REPEA
T
during programme playback, the current track or all programmed tracks will
be played repeatedly
.
™
REPEA
T/REPEA
T ALL
icon and
PROG
will appear on the display
.
6.
Press
9
in stop mode to clear the programme.
™
PROG
will disappear from the display
.
Notes : -
The programming is automatically cleared as soon as the CD compartment is opened.
-
The function of programme setting is disabled in PLA
Y/P
AUSE mode.
-
Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks from such a VCD.
For MP3-CD only 1.
In stop mode, press
PROG
on the remote control to enter programme setting.
™
PROG
will start flashing and "
P01
" will be displayed.
™
On TV screen, "PROG" program list (5 lines per page) will be displayed.
2.
Press
digits 0 - 9
on the remote control or
¡
/
™
to select the desired album.
3.
Press
PROG
to store the select album. The number “
AXX
” represents the album no.
4.
Press
/
§
repeatedly (or
digits 0 - 9
on the remote control) to select the desired TRACK for
programming.
5.
Press
PROG
to store the select track.
™
PROG
will remain on the display
.
•
Repeat steps
1
to
5
to store other desired album and track.
6.
Press
9
to end programme setting.
•
Press
PROG
in stop mode can review the programme sequence.
7.
Press
2
to start programme playback. Y
ou can press
/
§
to select the programmed track to
play
.
8.
Press
9
once
stop programme playback or
twice
to clear the programme.
PROGRAMMING TRACKS
INSTRUCTIONS FOR USE
CD/VCD/MP3-CD
English
™
On TV screen, the total ALBUM and TRACK number will display
, also with the album list (max.
10 lines per page). The current selected music is highlighted.
Notes : -
To
ensure good system performance, wait until the disc completely reads before
proceeding.
-
For MP3-CD, the disc reading time may exceed 1 minute due to the large number of songs compiled into one disc.
1.
Press
2;
to start playback.
™
The track number of the current track and
2
appear on the
display
.
•
To
interrupt playback, press
2;
.
™
2
will disappear and the current track number will start flashing.
•
To
resume playback, press
2;
again.
2.
To
stop playback, press
9
.
To
select a desired track
•
Press
or
§
§ § §
§
§
§
§
on the set repeatedly (or use digits 0 - 9 buttons on the remote control) until the
desired track appears on the display
.
•
If playback is stopped, press
2;
to start playback.
To
search for a particular passage during playback
•
Press and hold
or
§
on the set for 1 second (or on the remote
control,press
5
or
6
)
™
During searching, the volume will be muted.
For MP3-CD only To
select a desired album
•
On the remote control, press
¡
or
™
until the desired album number appear on the display
.
™
"
AXX
" will be displayed.
™
On TV screen, the arrow will move forward/backward in the ALBUM menu.
To
select a desired track
•
Press
or
§
on the set repeatedly (or on the remote control, press
or
§
) to select a desired
track from the current album.
™
"
XXX
" will be displayed.
™
On TV screen, the arrow will move forward/backward in the TRACK menu.
•
Use the digital keys on the remote control to select the track under current album directly
.
To
select and playback another track during playback mode
1.
Press
or
§
repeatedly to select another track.
™
The new selected track will show on the display screen and TV screen and playback continuously
.
2.
Press
2;
to start playback the new selected track.
For VCD only
•
Either p
ress
5
or
6
on the remote control repeatedly to select fast search speed (x1, x2, x3 or x4)
or
press & hold
or
§
on the set for 1 second and then release
or
§
to select fast search speed
(x1). Repeat this step to select other speed (x2, x3, x4).
SELECTING A DESIRED TRACK/P
ASSAGE
VCD MP3
LR
PLA
YING A NORMAL DISC