Finding a passage within a
track
1
During playback, press and hold down
∞
or
§
.
➜
The disc is played at high speed and low
volume.
2
When you recognize the passage you want,
release
∞
or
§
.
➜
Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1
In the stop position, press
PROG
to activate
programming.
➜
Display shows
P01
indicating the start of
the program and
PROG
flashes. (See
6
)
2
Press
∞
or
§
to select your desired track
number.
For MP3-CD/WMA:
First press
ALBUM+/-
once or more to find your album.
3
Press
PROG
to store the desired track.
➜
Display shows
P02
, indicating the next
program location available.
4
Repeat steps
2
to
3
to select and store all
desired tracks.
5
Press
2;
to play the program.
To review your program
In the stop position, press and hold
PROG
3
seconds.
➜
The display shows all the stored tracks in
sequence.
Helpful hints:
–
Display shows
P01
if no track is
programmed.
–
If you try to store more than 20 tracks, no
track can be stored and the display will show
---
with “PROG”
.
To erase a program
You can erase a program by:
– pressing
9
(twice during playback or once
in the stop position);
– selecting
FM
,
MW
or
OFF
position;
– opening the disc door.
➜
Display:
PROG
disappears.
Selecting different play
modes (See
7
)
You can select and change the various play
modes before or during playback, and
combine
REP
or
REP ALL
play modes with
PROG
.
REP
– plays the current track continuously.
REP ALL
– plays the entire disc/program
continuously.
SHUF
– plays all tracks in random order
(not available with
PROG
).
1
To select play modes
,
press
MODE
once or
more.
2
Press
2;
to start playback if in the stop
position
.
3
To select normal playback, press
MODE
repeatedly until the various modes are no
longer displayed.
–
You can also press
9
to cancel your play
modes.
MP3-CD / CD Player
