Problem
Solution
No power.
Make sure that the power adaptor is securely
connected to both the power supply and the CD sound
machine.
Make sure that the power supply is available.
Make sure that batteries are correctly inserted, and
power adaptor is disconnected from the CD sound
machine.
No sound
or poor
sound.
Adjust the volume level.
To play audio input from a source other than
MP3-
LINK
socket, disconnect the MP3 link cable.
No
response
from the
CD sound
machine.
Disconnect and reconnect the power adaptor, and then
turn on the CD sound machine again.
As a power-saving feature, the CD sound machine
automatically switches to standby mode after it keeps
inactive for 5 minutes. Press to switch it back to
working mode.
No disc is
detected.
Insert a disc.
Make sure that the printed side of the disc faces outwards.
Wait until the moisture condensation at the lens is cleared.
Replace or clean the disc.
? @JQ%
Radio
reception is
poor.
Increase the distance between the CD sound machine
and your TV or VCR.
Fully extend the FM antenna.
Adjust the position of the FM antenna.
Connect an outdoor FM antenna instead.
