Philips AZ1200, Руководство пользователя

Страница: 9 / 66

CD PLAYER
9
English
1 Set the POWER slider to CD.
2 Press
/
OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
™
The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the PLAY·PAUSE
2;
button to start CD play.
™
Display indication: the current track number.
5 Press the STOP
9
button to stop CD play.
™
Display indication: the total number of tracks.
You can interrupt CD play by pressing PLAY·PAUSE
2;
. Continue
CD play by pressing the button again.
™
Display indication: the current track number flashes.
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER slider to TUNER or TAPE.
If you make a mistake when operating the CD player, or the
CD player cannot read the CD, the display shows
E or no . (See
chapter ”TROUBLESHOOTING”.)
If you press PLAY·PAUSE
2;
and there is no CD inserted the
display shows
no
.
CD
CD
CD
STOP
PLAY
PAUSE
SEARCH
CD
BAND
TUNING
FM
MW
LW
1600
275
255
1300
kHz kHz
MHz
100
104
108
OPEN
Playing a CD