Philips AZ1038, Руководство пользователя

Страница: 18 / 21

18
English
Troubleshooting
If a fault occurs, first check the points listed below before taking the set
for repair.
If you are unable to remedy a problem by following these hints, consult
your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric
shock. Under no circumstances should you try to
repair the set yourself, as this will invalidate the
guarantee.
Problem
– Possible cause
• Remedy
No sound /power
– Volume not adjusted
• Adjust the VOLUME
–
Power cord not securely connect-
ed
• Connect the AC power cord
properly
– Batteries dead/ incorrectly insert-
ed
• Insert (fresh) batteries correctly
– Headphones connected to the
set
• Disconnect headphones
–
CD contains non-audio files
• Press
∞
,
§
once or more to
skip to a CD audio track,
instead of the data file.
Display does not function
properly/ No reaction to
operation of any of the con-
trols
– Electrostatic discharge
• Switch off and unplug the set.
Reconnect after a few seconds
Severe radio hum or noise
– Electrical interference: set too
close to TV, VCR or computer
• Increase the distance
Poor radio reception
– Weak radio signal
• FM: Adjust the FM telescopic
aerial.
no indication
– No disc inserted
• Insert asuitable disc
–
CD badly scratched or dirty
P001-020_AZ1038_Eng 5/15/08 16:02 Page 18