3 - 4
Different play modes: SHUFFLE and REPEA
T
(See
4
)
You can select and change the various play modes
and combine the modes with
PROGRAM
.
shuffle
– tracks of the entire disc/ program are
played in random order
shuffle
and
repeat all
– to repeat the entire disc/
programme continuously in random order
repeat all
– repeats the entire disc/ program
repeat
(and
shuffle repeat
) – plays the current
(random) track continuously
1
To
select play mode, press
MODE
once or more.
2
Press
2;
to start playback if in the stop position.
3
To
select normal playback, press
MODE
repeatedly
until the various modes are no longer displayed.
– Y
ou
can
also
press
9
to cancel your play mode.
Programming track numbers
In the stop position, select and store your tracks in the
desired sequence. Up to 20 tracks can be stored in the
memory
.
1
Press
∞
or
§
on the set to select your desired
track number
.
MP3-CD mode only:
First press
ALBUM,
or
–
once or more to
find your album, then press
SEARCH
∞
or
§
.
2
Press
PROG
.
™
Display: and
the
selected
track
number
. appears
briefly
.
™
Display: if
no
track
selected
for programming.
3
Repeat steps 1-2 to select and store all desired
tracks.
™
Display: if
you
try
to
programme more than 20 tracks.
Reviewing the programme
In the stop position, press and hold
PROG
until the
display shows all your stored track numbers in
sequence.
™
Display: if
no
tracks
programmed.
Erasing a programme
You can erase the programme by:
•
pressing
9
twice;
™
is displayed briefly and
disappears.
•
selecting
TUNER
source.
Maintenance & Safety
CD player and disc handling
(See
5
)
•
If the CD player cannot read CDs correctly
, use a
cleaning CD to clean the lens before taking the set
to repair
.
•T
he lens of the CD player should never be touched!
•
Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player
. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
•A
lways close the CD door to avoid dust on the
lens.
•T
o clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
•
Never write on a CD or attach any stickers to it.
Safety Information
•D
on’
t expose the set, batteries or CDs to humidity
,
rain, sand or excessive heat.
•C
lean the set with a dry cloth. Don’
t use any
cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the set.
•P
lace the set on a hard and flat surface so that the
system does not tilt. Make sure there is good
ventilation to prevent the set overheating.
Playing MP3-CD & CD
This CD player plays Audio Discs including CD-R(W)s,
and MP3 CD-ROMs.
•
CD-I, CDV
, VCD, DVD or computer CDs, are not
possible.
1
Press
ST
ANDBY
y
to on, then
SOURCE
to select
CD.
2
Open the CD door
.
™
Display:
when the CD door is
opened.
3
Insert a disc with the printed side facing up and
close the CD door
.
™
Display: when
reading
disc
contents;
™
Display:
if no disc inserted/ disc
incorrectly inserted.
™
Display: if
disc
damaged/
dirty:
– CD throughout CD operation;
– MP3CD throughout MP3-CD operation;
–
In CD stop mode: total track number and total
playback time.
™
is shown if you have
inserted a non-finalized CD-R(W)/ blank disc.
Note:
MP3-CDs may take more than 10 seconds to
read.
4
Press
2;
to start playback
™
Display: Current track number and elapsed track
time during CD
playback.
™
If MP3-CD, the album number also is shown.
5
To
pause playback press
2;
. Press
2;
again to
resume play
.
6
To
stop CD playback, press
9
.
7
Press
ST
ANDBY
y
to switch of the set.
Note: CD play will also stop when:
– the CD door is opened;
– the CD has reached the end;
– you select tuner source.
MP3-CD/ CD text display
During playback, press the
DISPLA
Y
button briefly
and repeatedly to view text information:
MP3-CDs
(See
3
)
Press
DISPLA
Y
once or more to view e.g.
-
title name and elapsed track time;
-
album name and elapsed track time;
-
album number
, track number and elapsed track
time;
-I
D3 tag details, if available. Otherwise, display
shows .
CDs
Press
DISPLA
Y
once or more to view e.g.
-C
urrent track number and elapsed track time during
CD playback;
-R
emaining playback time of current track.
Selecting a different track
MP3-CD mode only:
First press
ALBUM,
or
–
once or more to
find your album. Then follow the next 2 steps.
™
Display:
if no albums are
available.
•
Press
∞
or
§
on the set, once or repeatedly to
select.
•
In the pause/stop position, press
2;
to start
playback.
Finding a passage within a track
1
Press and hold
∞
or
§
.
™
The CD is played at high speed and low volume.
™
No sound is heard during MP3 fast cue/review
.
2
When you recognize the passage you want, release
∞
or
§
to resume normal playback.
MP3-CD/CD
PLA
YER
MP3-CD/CD
PLA
YER
MAINTENANCE & SAFETY
INSTRUCTIONS FOR USE
