
OPERATION DIGITAL
TUNER
6
English
1.
Adjust the source selector to your desired sound source:
OFF/ TAPE, TUNER, CD
.
2.
Adjust the sound using the
VOLUME, INCREDIBLE
SURROUND
and
OFF
, DYNAMIC BASS BOOST, ULTRA
BASS
controls.
3.
To switch off the set, adjust the source selector to
OFF/TAPE
position and check that the cassette keys are released.
Note:
When the set is switched off the tuner presets will be
retained in the set's memory.
1.
Adjust the source selector to
TUNER
.
2.
Press
BAND
once or more to select your wave band.
3.
To tune to radio stations, press the
SEARCH
controls
∞
or
§
until the frequency in the display starts running, then
release the control.
–
Srch
appears in the display and the radio automatically
tunes to a station of sufficient reception.
4.
Repeat if necessary until you find the desired station.
•
To tune a weak transmitter
, briefly press
∞
or
§
until
you have found optimum reception or the correct frequency.
– When
STEREO
appears in the display, you are receiving a
FM-stereo transmitter.
To improve radio reception
• For
FM
, pull out the telescopic aerial. Incline and turn the
aerial. Reduce its length if the signal is too strong (very close
to a transmitter).
• For
MW
, the set is provided with a built-in aerial so the
telescopic aerial is not needed. Direct the aerial by turning
the whole set.
RADIO RECEPTION
GENERAL OPERATION
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
SEARCH
ST
OP-OPEN
PAUSE
FM
AM
TUNER
SWFM
MW
LWAM
PROGR
PRESET
PROG
BAND
CD MODE