Philips AZ 1009, Инструкция по эксплуатации

Страница: 7 / 116

CD PLAYER
7
English
1 Set the POWER slider to CD.
2 Press
/
OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
™
The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the
2;
button to start CD play.
™
Display indication: the current track number.
5 Press the
9
button to stop CD play.
™
Display indication: the total number of tracks.
You can interrupt CD play by pressing
2;
. Continue CD play by
pressing the button again.
™
Display indication: the current track number (flashing).
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER slider.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows
E
or
no
. (See
”TROUBLESHOOTING”.)
If you press
2;
and there is no CD inserted, the display
shows no .
CD MODE
ECORD
SEARC
H
PLAY
RECORD
OPEN
Playing a CD